Skip to content
English
Sign in
Talk to our team
  • There are no suggestions because the search field is empty.

RX1 GENII to RAY Upgrade Instructions

This article explains the process on how to upgrade the Sony RX1 RII from the WingtraOne GENII to the WingtraRAY 

 

Important:
After upgrading to a WingtraRAY payload mount, reverting the payload to a WingtraOne GEN II mount is not supported and will void the warranty.

 

Tools needed: T10 screw driver (not Torx Plus)



#

Illustration

Instructions

Disassemble GENII Payload

1

RX1 upgrade2
  • Pull the 4 pins out of the rubber balls

2

RX1 upgrade
  • Pull the rubber balls out of the lower cover.

Upgrade to WingtraRAY Payload

3

  • On your RX1 RII mount, keep the 4 rubber balls with their top pins on the plate
  • Install the new brackets as shown in the images on the left

4

  • Insert the 4 pins back into the rubber balls

5

  • Bring the camera in position, the “flight direction” arrow on the camera has to point towards the payload connector of the WingtraRAY mount
  • Insert the camera into the payload mount and secure it with the 4 shoulder screws. 

6

  • Connect the USB-C cable to the WingtraRAY mount and you are done with the payload upgrade