Skip to content
English
Sign in
Talk to our team
  • There are no suggestions because the search field is empty.

Position lights

Learn how to install the position lights on your WingtraOne

Time required 15 min
Difficulty Easy
Equipment

WingtraOne, position lights, alcohol wipe

 

POSL_2

Attach the lights

position_lights1
  • Clean both wing tips with the alcohol wipe and let it dry. 
⚠️ Do not touch the cleaned area until it is dry.

 
position_lights2
  • Take the provided hook (male) Velcro pads and attach them to the pre-cleaned wing tip on each side.
position_lights3
  • Attach the green light on the right (green-labeled) wing and the red light on the left (red-labeled) wing.

Charge the position lights

1. Insert the Micro USB adapter into the position light charger socket. Pay attention to correct polarity (red/plus and black/minus)

2. Charge the position lights with a Micro USB charger

3. The indicator on the Micro USB adapter:

  • Red LED:  battery being charged
  • Blue LED: battery fully charged

The charging time is approximately 1h, and the fully charged position lights can be used for approximately 1h.

Operating modes

You can change between three different light modes by pressing the button on the side of the lamp.

  • First mode:           double flash
  • Second mode:     single flash
  • Third mode:         slow flash