Skip to content
English
Sign in
Talk to our team
  • There are no suggestions because the search field is empty.

Wingtra Blu software updates, from v2.5.0-b.4 to v2.10.2-b.1

This article explains how to install a firmware update that resolves WingtraPilot issues that started to occur on the whole fleet from March 2, 2023.

Note: Please follow these instructions only if you are an existing BLU customer running SW v2.5.0-b.4. 

To update your Blue UAS compliant drone from the previous firmware version v2.5.0-b.4 to the version, v2.11.2-b.1, follow these steps:

  1. In case you have used the temporary workaround of setting the tablet clock to a date prior to March 2, 2023, make sure the date is set correctly again.
  2. For this update, use these update binaries: WingtraPilot_v2.10.2-b.1.APK, recovery_wingtra.SH and wingtra_recovery_resource.TAR.
  3. Put the recovery_wingtra.SH and wingtra_recovery_resource.TAR file onto the Camera SD card.
  4. Put the SD card back into the camera.
  5. Make sure the ground telemetry module is not connected to the tablet.
  6. Power up the drone.
  7. Update WingtraPilot on the tablet with the WingtraPilot_v2.10.2-b.1.APK file.
  8. Plug the telemetry module into the tablet to connect to the WingtraOne. A dialog should inform you that the WingtraOne was successfully updated. Note that this step can take a few minutes.
  9. Finally, update to the latest blue approved versionSW 2.11.2-b.1 with instructions here.